| View previous topic :: View next topic |
| Author |
Message |
samgreco
Joined: 31 Mar 2003
Posts: 5
|
 Posted: Wed Mar 12, 2008 1:48 am Post subject: SageTV, Vista and Service Mode not working |
 |
|
Has anyone run into this? Or is anyone even using this setup?
I have my USB-UIRT connected to my SageTV server running Vista. This is a new install of Vista and a "restore" of SageTV from my previous XP install. I really only copied the WIZ.BIN from the old install. So it's really a fresh install.
If I run SageTV in service mode, the USB-UIRT will EITHER receive signals OR send, but never both. Usually, it will send and not receive. This all worked flawlessly on XP (I know, I know, but I've gone down the path). I am hoping to solve this as everything else is working quite well.
If I run SageTV NOT in service mode, everything works as expected.
Any thoughts?
Thanks |
|
| Back to top |
|
 |
lcddream
Joined: 31 Aug 2008
Posts: 2
|
| Posted: Mon Nov 24, 2008 12:46 am Post subject: |
|
|
| i'm having the same exact issue - has anyone figured out a solution? |
|
| Back to top |
|
|
fitzpatr
Joined: 03 Apr 2009
Posts: 1
|
| Posted: Fri Apr 03, 2009 3:58 am Post subject: |
|
|
| I am also having this issue...anything that can be done? |
|
| Back to top |
|
|
hendercc
Joined: 12 May 2009
Posts: 3
|
| Posted: Tue May 12, 2009 6:28 am Post subject: sometimes works but mostly not |
|
|
| I use Sage in service mode on Vista. It will work for a little while then while I'm in the midlle of navigating menus, it stops working> I have to reboot or go to control panel to disable and re-enable the USBUIRT... which doesn't always work. Worked fine on xp for years with no issues. I hope someone has some ideas. |
|
| Back to top |
|
|
hendercc
Joined: 12 May 2009
Posts: 3
|
| Posted: Thu Jun 04, 2009 12:53 am Post subject: Vista and Sage issue |
|
|
| bump |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
