| View previous topic :: View next topic |
| Author |
Message |
BeyondVR
Joined: 01 Feb 2010
Posts: 1
|
 Posted: Mon Feb 01, 2010 3:24 am Post subject: Any idea why I can get the UIR codes, but not the learn data |
 |
|
| I'm using LrnHelper. It can easily recieve the UIR, but will not learn a code in any format. The signal indicator always indicates there is no signal. The light on the transceiver will blink if set to blink when receiving, but only blinks (receives) when NOT attempting to Learn. |
|
| Back to top |
|
 |
Xtremedimension
Joined: 20 Apr 2010
Posts: 1
|
| Posted: Tue Apr 20, 2010 2:47 pm Post subject: |
|
|
| I have the same problem, any idea? |
|
| Back to top |
|
|
canoewhiteh2o
Joined: 28 Dec 2006
Posts: 53
|
| Posted: Wed Apr 21, 2010 10:54 am Post subject: |
|
|
| The instructions in lrnhelper indicate to hold the remote about 6" from the USB-UIRT. I find that this distance is too far and does not work. Hold the remote somewhere between 1-2 inches from the usb-uirt and point the remote just to the left (1/4") of the red indicator led. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
