Page 1 of 1
Bang & Olufsen
Posted:
Thu Apr 15, 2004 12:37 amby NeilVernon
Does USB-UIRT work with B&O remote controls?
Posted:
Thu Apr 15, 2004 4:02 amby jrhees
Possibly...Some B&Oequipment operates at 56KHz, which will work. However, other equipment uses a 455KHz carrier,which is not currently supported(neither TX or RX).
If youknow the model of equipment, perhaps we can use remotecentral.com todetermine the carrier freq.
-Jon
Beolink 1000 / Beo4
Posted:
Tue Nov 02, 2004 12:58 pmby sorensen
Hi ,
I tried to figure this on remotecentral.com - but with no luck. Do you know if Beolink 1000 and/or Beo4 will work with usb-uirt ?
RX only is what I want.
Thank you !!
Best regards
L Sorensen
Posted:
Tue Nov 02, 2004 4:16 pmby jrhees
If you can find any codes for it on RemoteCentral please post them and I can give you an opinion. Without codes to guess by I would say the odds are against it.
-Jon
Posted:
Tue Nov 29, 2005 8:21 pmby Naylia
any chance you would be willing to customize a USB-Uirt with a 455KHz reciever for a little extra? or is it not possible at all?