Page 1 of 1
transmit not working toshiba tv only
Posted:
Fri Feb 03, 2006 8:42 pmby Mike909
Hi, as I explained in
this thread at promixis I can send IR out my USBUIRT just fine to my devices, except for my
Toshiba TV. For some reason the power will not send correctly (using girder of course). It works fine sending power/vol. etc to my Pioneer reciever, but not to my tv. Any suggestions?
p.s. I tried changing the obvious settings in girder (speed, thresh, etc).
Posted:
Sat Feb 04, 2006 6:52 pmby mike909
I was told to ask Jon. Here is some more info too...
Girder:338
usb-uirt plugin version 2.6.9
Code 1: R075881585616
IR Debug window attached.
carrier 38.5KHz
IR Debug window:
230B 57EC 157 1609 057B 016 FFFF 0758 57F6 157 160A 0576 016 FFFF 0758 57F1 157 160B 0576 016 FFFF 0758 57EC 157 160D 0576 016 FFFF 0758 57F6 157 1608 057B 016 FFFF 0758 57F1 157 160B 057B 016 FFFF 0758 57F1 157 1606 057B 016 FFFF 0758 57F6 157 160A 057B 016 FFFF 0758 57F6 157 1605 057B 016 FFFF 0758 57F1 157 160B 0576 016 FFFF 0758 57F1 157 1606 057B 016 FFFF 0758 57F6 157 160A 0576 016 FFFF 0758 57F1 157 160B 057B 016 FFFF 0758 57F1 157 1609 057B 016 FFFF 0758 57EC 157 1608 057B 016 FFFF 0758 57F6 157 1608 057B 016 FFFF 0758 57F6 157 1608 0576 016 FFFF 0758 57F1 157 1606 057B 016 FFFF 0758 57F6 157 160A 057B 016 FFFF 0758 57F6 157 1605 057B 016 FFFF
Posted:
Thu Feb 09, 2006 3:59 pmby Guest
Well, this kind of sucks, as the sole purpose of buying it was to be able to use one button to turn on/off all devices. Is there a way to check the firmware on it? Maybe it needs to be updated?
Posted:
Thu Feb 09, 2006 11:40 pmby jrhees
It looks like the USB-UIRT is only seeing the 'repetition' part of the power button's IR code, and is missing the initial portion of the code. Can you try doing another IR debug of the button making sure:
a) The remote is laid on a flat surface along with the USB-UIRT and aimed directly at the USB-UIRT at a spot just to the left of the red LED.
b) the remote has fresh batteries.
-Jon
Posted:
Fri Feb 10, 2006 6:03 pmby mike909
Ok, will swap batteries and lay on flat surface when I get home tonight. Thanks for the suggestion. Will post back.
Posted:
Sat Feb 11, 2006 6:18 pmby mike909
changed the batteries, and that did it. Thanks for the tip...I just figured it it worked directly to the tv it would work for learning....I was wrong. Thanks again. Great product.