USB-UIRT Forum

Hello,

I am an owner of a UIRT2 and using it through Girder. All is fine except i can't control one device. UIRT2 simply can't learn the code directly.
Using a PPC with a CCF compatible program I was able to control it. When I tried to import the CCF codes to Girder, it complains with "too many burst pairs".
Below is a CCF sample. I've read that the USB-UIRT handles longer codes, so...
Can it handle this one? Should i upgrade?

Thanks a lot,
Theo

Code: Select all

0000 006d 0071 0001 0080 0040 000f 0030 000f 0030 000f 0011 000f 0011 000f 0011 000f 0030 000f 0011 000f 0011 000f 0030 000f 0030 000f 0011 000f 0030 000f 0011 000f 0011 000f 0030 000f 0030 000f 0011 000f 0030 000f 0030 000f 0011 000f 0011 000f 0030 000f 0011 000f 0011 000f 0030 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0030 000f 0011 000f 0011 000f 0030 000f 0011 000f 0011 000f 0030 000f 0030 000f 0030 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0030 000f 0030 000f 0030 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0030 000f 0030 000f 0030 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0030 000f 0030 000f 0030 000f 0030 000f 0030 000f 0030 000f 0030 000f 0011 000f 0ed8

Yes it can. This is one of the main differences between the two designs -- the USB-UIRT uses a more capable (more memory) micro as well as the USB interface runs at a much higher speed allowing for arbitrary IR 'streaming'

-Jon

That's great!

I just ordered one... Can't wait to try it out!

I guess that the UIRT2 Command strings (in Girder) are compatible with the USB-UIRT design... or do i have to relearn all my existing commands?

Thanks Jon
Theo

UIRT2 'event' strings (the 12-digit numbers) *can* be compatible, but you will have to turn on an option in the preferences of the USB-UIRT ('Generate UIRTx-compatible UIR codes")

-Jon