UIRT Stereo Jack to Xantech IR Blaster

Issues relating to installation of your USB-UIRT device.

Moderator: jrhees

UIRT Stereo Jack to Xantech IR Blaster

Postby smarty » Wed Dec 27, 2006 7:25 pm

I did not find a clean answer in my forum search.....

I need to use the stereo jack (2 zones) in the back of a usb-UIRT to send IR out to two Xantech IR emitter blasters (model 380-20). Eventually I will have 4 IR output zones (2 UIRT's) controlled.

I have an EE at work that is helping me with an amplifiying circuit shown here: http://www.cocoontech.com/index.php?showtopic=6405

I need to know more about the output of the UIRT, so I can modify the amplifing circuit properly. Presently this circuit causes the IR blaster to fire when the UNCONNECTED zone is sent a signal AND when the connected zone is sent a signal. Ideas??
Elk-Insteon-GeoVision-RCS-DMC1-PowerHome-Xlobby- SageTV
smarty
 
Posts: 4
Joined: Wed Dec 27, 2006 6:54 pm
Location: Texas

Postby smarty » Wed Dec 27, 2006 7:39 pm

It looks like this may have answered my question

http://www.usbuirt.com/phpBB2/viewtopic.php?t=600&highlight=uirt+output
Elk-Insteon-GeoVision-RCS-DMC1-PowerHome-Xlobby- SageTV
smarty
 
Posts: 4
Joined: Wed Dec 27, 2006 6:54 pm
Location: Texas

Postby cspannos » Tue Aug 24, 2010 6:53 pm

I know it's like 4 years later... but these forums seem pretty dead. Did you ever get an answer to this?
cspannos
 
Posts: 3
Joined: Mon Aug 23, 2010 11:22 pm


Return to Installation

Who is online

Users browsing this forum: No registered users and 9 guests