USB-UIRT Forum

Plug-n-Play IR Solution

Skip to content

Volume control on Philips receiver?

Having problems? Use this forum to find help!

Moderator: jrhees

Post a reply

Volume control on Philips receiver?

Postby drogers » Fri Mar 07, 2003 2:57 am

I've got my USB UIRT working great for all of my TiVo functions, but can only get some of the fuctions for my Philips receiver working. I've captured the commands for Volume Up and Volume Down (both standard and RAW), but the uirt is unable to actually change the volume. Any ideas?
drogers
 
Top

add'l info -

Postby Guest » Fri Mar 07, 2003 3:01 am

Here's what got captured for Volume Up -

R0702261E261E261E481E261E261E261E2640481E261E261E26

I should also mention that I didn't capture any of the TiVo codes - After all the trouble I had with the receiver, I gave up and imported them from a website listing IR codes for Pronto owners. Unfortunately I can't find a similar list for my receiver.

Thanks!
Guest
 
Top

Re: add'l info -

Postby jrhees » Fri Mar 07, 2003 5:07 pm

Anonymous wrote:Here's what got captured for Volume Up -

R0702261E261E261E481E261E261E261E2640481E261E261E26

I should also mention that I didn't capture any of the TiVo codes - After all the trouble I had with the receiver, I gave up and imported them from a website listing IR codes for Pronto owners. Unfortunately I can't find a similar list for my receiver.

Thanks!


drogers,

First things to try are to try different frequencies (try 36, 38, and 40KHz) and also (first) set the repeat count up high to something like 10 or 15. You can always back the repeat count down later.

What model philips receiver are you using?

-Jon

P.S. You can also send me an 'IR debug' of your volume button. That might help.
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm
Top

Postby drogers » Fri Mar 07, 2003 11:13 pm

It's an FR975. Here's the IR Debug of VolDn

Code: Select all
A9 10 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0F 13 0E 25 0F 13 0F 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 14 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0F 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0F 13 0E 13 1F 13 FF
06 D2 13 0E 13 0F 13 0E 25 0F 13 0F 13 0E 13 0F 13 20 25 0F 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 20 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0F 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
drogers
 
Top

Postby Guest » Fri Mar 07, 2003 11:21 pm

And the IRDebug for VolDN

Code: Select all
FA 80 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0F 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0F 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0F 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF

Guest
 
Top

Postby drogers » Fri Mar 07, 2003 11:23 pm

Whoops - second one was VolUP

Thanks for your help!
drogers
 
Top

Postby jrhees » Sat Mar 08, 2003 8:49 pm

drogers wrote:Whoops - second one was VolUP

Thanks for your help!


drogers,

Did you try a large repeat value?

-Jon
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm
Top

Postby Guest » Fri Mar 14, 2003 1:50 am

Yes, I've tried everything from 1-20, every frequency range available, and capturing raw or not. Any ideas?
Guest
 
Top

Postby jrhees » Fri Mar 14, 2003 3:38 pm

drogers,

Do any of the other functions on your Receiver work (other than volume?)

I'll try to duplicate your remote with my All-for-One. If you happen to know the code for that remote, let me know.

-Jon
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm
Top

Postby Guest » Mon Mar 17, 2003 7:03 pm

jrhees wrote:drogers,

Do any of the other functions on your Receiver work (other than volume?)

I'll try to duplicate your remote with my All-for-One. If you happen to know the code for that remote, let me know.

-Jon


Yup, other things I program (mostly power/mode switching so far) have worked, volume doesn't. I have no idea what the remote code would be for a one-for-all, I don't even own a universal remote (other than my PC ;-))

Thanks again,
D
Guest
 
Top

Postby Guest » Tue Mar 25, 2003 2:33 am

So am I SOL here? I'd hate to have to go back to an ir distribution setup just for one function...
Guest
 
Top

Postby jrhees » Tue Mar 25, 2003 2:47 pm

drogers,

No, but you'll likely have to wait for the next USB-UIR firmware upgrade. This version (probably a couple weeks away) will take advantage of the wideband IR 'learning' receiver built into the USB-UIRT and will hopefully get a more exact copy of what your remote is sending out -- frequency and all.

I was unable to find an all-for-one code for your receiver. Are you aware if there are any matches for your receiver in the Pronto library at www.remotecentral.com ?

-Jon
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm
Top

Postby drogers » Sun Mar 30, 2003 9:13 am

Yeah, this one -
http://www.remotecentral.com/cgi-bin/fi ... -fr975.zip
should be it. Unfortunately I don't have a pronto and can't test it....

I can wait - I'll be in the middle of moving for the next 2 weeks anyway.
drogers
 
Top

Postby jrhees » Sun Mar 30, 2003 10:40 pm

Hmmm... I wonder if there is a program available to read in the pronto .CCF file you pointed me to and display the hex of the remote codes?

-Jon
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm
Top
Post a reply

Return to Troubleshooting

Who is online

Users browsing this forum: Google [Bot] and 12 guests

Powered by phpBB® Forum Software © phpBB Group