Trouble with Channel 11

[Chris_C]

Sorry Jon, been away for a while!! Yeah, thats exactly whats happening. If I press the 'one' button (I'm using girder btw), the code at the bottom of the girder window (next to the red light) toggles from 1700008280CD then 1700008280EF. This matches with what you've said before, the problem comes when I try and get girder to do this. I have managed a separate girder file using states, which works. But when I try and integrate it into the SS_GirderTuner commands, it goes back to only outputting the single number.

Any ideas??? thanks for your time again!

[jrhees]

I suppose one way to tackle this is to LEARN (in the USB-UIRT Learn dialog) both codes for each button. You would do this by creating two commands, going to the first command and going into the USB-UIRT settings, then LEARN button, and press and hold, say, the '1' button. Then go to the second command you created and do the same with the '1' button, taking care NOT to press the '1' or any other button between these two learns. You will then have two '1' commands in Girder and would need to put in some state logic so that when SSGirderTuner calls for two '1's in a row Girder would send one of each command '1'.

-Jon

[Chris_C]

All works!!! Cheers Jon, spot on as ever!